Accent Your Home With The Elegance Of Cast Iron
The Harman Accentra Pellet Stove is a high performance pellet stove with beautiful, traditional cast iron styling. The Accentra is state-of-the-art in every way.
From the moment you lift the door handle you know this is a stove built to a standard far above any other cast iron pellet stove on the market. The castings are smooth and detailed and the understated appearance accents a wide range of décor styles. And with the optional cast iron hearth pad and the outside air kit, you can install an Accentra where other pellet stoves can’t go.
The Accentra has a remarkably precise temperature control system built right in so you won’t need an old-fashioned thermostat. The Harman Accentra constantly monitors room temperatures and makes automatic adjustments to the pellet feed rate and combustion air so you get even heating. It even turns itself off and on as needed.
The Accentra can burn up to a ton of pellets without the need for ash removal or cleaning. When needed, the entire stove can be cleaned in less than half an hour.
The Accentra delivers high overall efficiencies due to the unique cast iron heat exchanger. The Accentra is rated at 40,000 BTUs per hour and will typically heat 1450 square feet of living space.
Harman Accentra Pellet Stove
Fuel Bio-Mass Pellets
BTU Range 0 to 40,000
Heating Capacity 1,400 square feet
Hopper Capacity 50 lbs
Blower Size 150 cfm
Outside Air Size 2.375 inches
Fuse Rating 5 amp
Weight 370 lbs
Feed Rate .75 lbs per hour (minimum)
4.75 lbs per hour (maximum)
Venting Size 3 Inch Pellet Vent Pipe
Testing Safety testing by Omni Testing Laboratory
ASTM-E1509 ? ULC-C1482 ? Oregon-814-23-900
per 40CFR-60.530 sup. Part AAA
per EPA method 28A and 5G